Dexin's SCH 10 seamless pipes are engineered for efficiency and performance in standard-pressure applications. Available in certified carbon and stainless steel, these pipes meet international standards including ASTM, ASME, and EN. With optimized wall thickness for weight savings without compromising integrity, Dexin's SCH 10 pipes offer reliable solutions for industrial, commercial, and mechanical piping systems where pressure requirements are moderate but quality cannot be compromised.
SCH 10 seamless pipes represent the standard-weight wall thickness series widely adopted across industries. Manufactured from certified carbon steel (ASTM A106/A53) and stainless steel (ASTM A312), these pipes provide optimal balance between strength and material efficiency. With wall thickness precisely calibrated for moderate pressure applications, SCH 10 seamless pipes deliver reliable performance in process piping, utility systems, and general industrial applications while minimizing unnecessary weight and material cost.
| Nominal Size (inches) | Outside Diameter (inches) | Outside Diameter (mm) | Wall Thickness (inches) | Wall Thickness (mm) | Weight (lb/ft) | Weight (kg/m) |
|---|---|---|---|---|---|---|
| 1/2" | 0.840 | 21.3 | 0.083 | 2.11 | 0.67 | 1.00 |
| 3/4" | 1.050 | 26.7 | 0.083 | 2.11 | 0.86 | 1.28 |
| 1" | 1.315 | 33.4 | 0.109 | 2.77 | 1.40 | 2.08 |
| 1 1/4" | 1.660 | 42.2 | 0.109 | 2.77 | 1.80 | 2.68 |
| 1 1/2" | 1.900 | 48.3 | 0.109 | 2.77 | 2.06 | 3.07 |
| 2" | 2.375 | 60.3 | 0.109 | 2.77 | 2.64 | 3.93 |
| 2 1/2" | 2.875 | 73.0 | 0.120 | 3.05 | 3.53 | 5.25 |
| 3" | 3.500 | 88.9 | 0.120 | 3.05 | 4.33 | 6.44 |
| 4" | 4.500 | 114.3 | 0.120 | 3.05 | 5.61 | 8.35 |
| 6" | 6.625 | 168.3 | 0.134 | 3.40 | 9.29 | 13.83 |
Technical Note: SCH 10 seamless pipes are manufactured under stringent quality control procedures including chemical analysis, mechanical testing, dimensional verification, and non-destructive examination. These pipes comply with international standards such as ASTM A106/A53 (carbon steel) and ASTM A312 (stainless steel), and are supplied with complete Mill Test Certificates (MTC) per EN 10204 3.1 for traceability and quality assurance.
Indicative pricing for SCH 10 seamless pipes. Actual prices vary based on material grade, quantity, and market conditions. Contact for project-specific quotation.
| Pipe Size (inches) | Outer Diameter (mm) | Wall Thickness (mm) | Material Grade | Approx. Price (USD/m) |
|---|---|---|---|---|
| 1/2" | 21.3 | 2.11 | ASTM A106 Grade B | 6.50 |
| 3/4" | 26.7 | 2.11 | ASTM A106 Grade B | 8.20 |
| 1" | 33.4 | 2.77 | ASTM A106 Grade B | 10.50 |
| 2" | 60.3 | 2.77 | ASTM A106 Grade B | 18.80 |
| 1/2" | 21.3 | 2.11 | ASTM A312 TP304 | 22.50 |
| 1" | 33.4 | 2.77 | ASTM A312 TP316 | 35.80 |
Every batch of Dexin SCH 10 seamless pipes undergoes comprehensive quality verification and is accompanied by full certification packages to ensure compliance with international engineering specifications and procurement standards.
_1768478439_WNo_300d300.png)
Professional evaluations from engineering and procurement specialists worldwide
Answers to common questions about SCH 10 seamless pipes, including materials, applications, standards, and customization.
SCH 10 refers to the pipe schedule, indicating a thinner wall compared to higher schedules like SCH 40 or SCH 80. This makes SCH 10 pipes lightweight and suitable for low-pressure applications.
They are commonly made from carbon steel or stainless steel, certified to meet international standards such as ASTM, EN, or API for low to medium-pressure piping systems.
Advantages include lightweight design, ease of installation, cost-effectiveness, and suitable performance for low-pressure fluid transportation and structural projects with minimal stress requirements.
Typical applications include water distribution, HVAC piping, chemical transport at low pressure, structural support, and general-purpose pipelines in industrial and commercial projects.
Yes, SCH 10 seamless pipes come with material certificates (MTCs) and inspection reports to ensure compliance with international standards and procurement requirements.
Yes, they can be supplied in various diameters, wall thicknesses, and lengths to meet project-specific requirements, including custom orders for industrial and export applications.
Quality control includes chemical composition analysis, mechanical testing, dimensional checks, and non-destructive testing to ensure consistent performance and defect-free delivery.
Industries such as water treatment, HVAC, low-pressure chemical processing, and light industrial construction often use SCH 10 seamless pipes for their piping needs.
Pipes should be stored in a dry, ventilated area, protected from moisture, dirt, and mechanical damage. Proper handling ensures the thin walls are not dented or deformed.
You can contact the supplier with your project specifications, including diameter, wall thickness, material, and quantity. Suppliers will provide a detailed quotation with certification and delivery options.